Contact Points
6230, STONERIDGE MALL ROAD
PLEASANTON, CA 94588
REQUEST NUMBER: 75N95022Q00540
DATE ISSUED: August 23, 2022
ISSUED BY CONTRACTING OFFICE: Department of Health and Human Services / National Institutes of Health / National Center for Advancing Translational Sciences (NCATS)/ OA / 9800 Medical Center Dr. Bldg. B, Rockville, MD 20850
FOR INFORMATION CONTACT: Michelle Cecilia, michelle.cecilia@nih.gov
CLASSIFICATION CODE:
J- Maintenance, repair, & rebuilding of equipment
NORTH AMERICAN CLASSIFICATION SYSTEM (NAICS) CODE:
811219 – Other Electronic and Precision and Equipment Repair and Maintenance
BUSINESS SIZE STANDARD: $22 million
SET-ASIDE STATUS: No Set Aside
Competition Status: This requirement is non-competitive
Non-Competitive (Single-sole Source (Including brand-name)) Determination: It has been determined that the item listed herein is available from 10x Genomics, Inc. – 6230 Stoneridge Mall Road, Pleasanton, CA 94588. The Chromium Connect by 10X Genomics, Inc. is a platform for automation of single-cell library construction workflows, such as 3' RNA sequencing, ATAC sequencing or DNA copy number variant analysis. These workflows offer insight into transcriptional and epigenetic landscapes on the single-cell level with unprecedented detail, however, they are extremely laborious. A single library preparation protocol for 1 to 8 samples for 3' RNA sequencing application can take a skilled researcher as many as 3 or more days. Automation of the protocols minimizes hands-on time and greatly increases sample throughput. Additionally, it leads to standardization of the procedures and virtually eliminates technical variation. The Assurance Plan ensures the Chromium Connect is operating optimally, is serviced annually, and any issues can be addressed in a timely manner. This supply is only available 10x Genomics, Inc.
Single-cell sequencing is a novel method that allows to derive global transcriptomic profiles - information on the expression level and nature of the transcripts - from each individual cell analyzed. Previously, this was only possible from bulk populations of cells and thus only population-level averages were available. the term "global" refers to the fact that rather than picking a list of genes for targeted analysis, all of the detectable transcripts are quantified. These innovations allow for unprecedented detail in studying how genes contribute to disease or how their expression correlates with cellular phenotypes and processes such as differentiation.
The opioid crisis highlights the urgent need for novel non-addictive pain medications, as well as improved treatments for opioid addiction and overdose. There is a need for pharmacological agents directed at novel targets to test new therapeutic hypotheses, new clinic-ready drugs directed at those targets, and new testing systems with the potential to be more predictive of human clinical response than traditionally used models. Through the Helping to End Addiction Long-term (HEAL) Initiative, NCATS will focus on the development of human cell-based models of opioid misuse and addiction and of pain. The Stem Cell Translation Laboratory (SCTL) is a state-of-the-art research facility within NCATS’ Division of Pre-Clinical Innovation is dedicated to addressing the scientific and technological challenges in the iPSC field. Specifically, the SCTL aims to develop a renewable supply of human cell-based models focusing on new patient-derived iPSC lines that give rise to specialized, functional nerve cells that are relevant for opioid misuse, addiction, and pain.
Single-cell sequencing methods have become widely used in every project that the SCTL has pursued to date. The SCTL has developed protocols for derivation of multiple major novel cell types from human pluripotent stem cells (embryonic or induced pluripotent stem cells), such as nociceptor cells, multiple subtypes of neurons, astrocytes, glial cells, or trophectodermal/trophoblast cells. In the past year, organoid cultures have been added to the list of routinely used techniques. At the same time, the SCTL is in the process of starting a number of collaborations with external expert research groups. These collaborations expand the in-vitro models by a number of novel cell types and methods. For all of these, single-cell sequencing applications are a cornerstone. For example, a method developed by the SCTL leads to differentiation of human pluripotent stem cells into nociceptors - pain-sensing peripheral neurons. Identifying the phenotype of the subpopulations of the cells is paramount for their application in research into nociception which directly advances the laboratory's contribution to addressing the opioid crisis.
The 10x Genomics is highly specialized there is a tight integration of hardware and software for proper operation and service. Due to their specialized nature only specially, trained technicians are able to diagnose and repair issues. Most parts are proprietary and only available through the manufacturer. 10x Genomics, Inc. is the only source available for the proper maintenance for the equipment specified.
DATE QUOTATION DUE:
All responses to this RFQ must be received by 9:00 AM Eastern, on September 2, 2022 and must reference the request number cited above. Responses must be submitted electronically to the contact person cited above. Fax responses will not be accepted.
IMPORTANT: This is a request for quotations. If you are unable to quote, please so indicate in a reply email to the contract specialist cited herein. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.
Purchase Description:
10X Genomics Chromium Connect Assurance Plan
Salient characteristics
The minimum characteristics required are as follows:
• Remote technical support and software updates proprietary to 10x Genomics
• Site visits for instrument repair and service by 10X Certified Technicians
• Replacement of Chromium Connect parts
• Replacement of reagents lost during malfunction
• 6-month preventative maintenance
Quantity:
1 10x Genomics Chromium Connect Assurance Plan
Delivery/Warranty
Service will be performed at NCATS located at 9800 Medical Center Drive, Room 150E, Rockville, MD 20850.
An estimated number of days for services to begin must be specified in any quote submitted. Delivery terms anticipated for FOB-Destination shall apply.
Contract Type:
A Fixed-Price type of Purchase Order award not exceeding the Simplified Acquisition Threshold is anticipated for any contract resulting from this requirement. The anticipated period of performance is approximately September 15, 2022 -September 14, 2023.
QUOTER TERMS AND CONDITIONS (to be filled out by the Offeror):
1. Period of Performance OR Delivery Date After Receipt of Order:
2. Shipping Point (F.O.B. OR Destination):
3. Payment Discount Terms:
4. Select One: Open Market; GSA FSS Contract Number; Other Government Agency (OGA) Contract Number, Government-wide Agency (GWAC) Contract Number; or National Institute of Health (NIH) Blanket Purchase Agreement (BPA) Number:
5. DUNS No:
6. Name of Company:
7. Street Address, City, State, Zip code:
8. Name of Person Authorized to Provide Quote:
9. Telephone Number and Email Address of Person Authorized to Provide Quote:
ADDITIONAL TERMS AND CONDITIONS, PROVISIONS, AND REPRESENTATIONS
The FAR Clauses are incorporated by reference and are provided in full text at https://www.acquisition.gov/
1. The provisions of FAR Clause 52.212-1 Instructions to Offerors—Commercial Items (OCT 2018) is applicable to this solicitation.
2. The provisions of FAR Clause 52.212.2 Evaluation—Commercial Items (Oct 2014) is applicable to this solicitation. The Government will evaluate quotations or offers in accordance with FAR 13.106-2 and award a purchase order from this solicitation to the responsible offeror whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes:
a. Technical capability of the item offered to meet the Government requirement;
b. Price; and
c. Past performance [see FAR 13.106-2(b)(3)].
3. The provisions of FAR Clause 52.212-3, Offeror Representations and Certifications—Commercial Items (Feb 2021), is applicable to this solicitation.
4. The provisions of FAR Clause 52.212-4, Contract Terms and Conditions—Commercial Items (OCT 2018) with Addenda: Stop Work Order, FAR Clause 52.242-15 (August 1989) is applicable to this solicitation.
5. The provisions of FAR clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Items (Jul 2021) is applicable to this solicitation:
52.222-3 Convict Labor (June 2003)
52.222-19 Child Labor-Cooperation With Authorities and Remedies (Jan 2018)
52.222-21 Prohibition of Segregated Facilities (Apr 2015)
52.222-26 Equal Opportunity (Sep 2016)
52.222-36 Equal Opportunity for Workers With Disabilities (Jul 2014)
52.222-50 Combating Trafficking in Persons (Mar 2015)
52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011)
52.232-33 Payment by Electronic Funds Transfer-- System for Award Management (Jul 2013)
The following FAR provisions are incorporated in full text:
52.225-1 BUY AMERICAN-SUPPLIES (JAN 2021)
(a) Definitions. As used in this clause—
Commercially available off-the-shelf (COTS) item—
(1) Means any item of supply (including construction material) that is–
(i) A commercial item (as defined in paragraph (1) of the definition at Federal Acquisition Regulation (FAR) 2.101);
(ii) Sold in substantial quantities in the commercial marketplace; and
(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(2) Does not include bulk cargo, as defined in 46 U.S.C.40102(4), such as agricultural products and petroleum products.
Component means an article, material, or supply incorporated directly into an end product.
Cost of components means—
(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or
(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.
Domestic end product means—
(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both-
(i) An unmanufactured end product mined or produced in the United States;
(ii) An end product manufactured in the United States, if-
(A) The cost of its components mined, produced, or manufactured in the United States exceeds 55 percent of the cost of all its components. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or
(B) The end product is a COTS item; or
(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components".
End product means those articles, materials, and supplies to be acquired under the contract for public use.
Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.
Foreign end product means an end product other than a domestic end product.
Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign.
Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.
Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.
United States means the 50 States, the District of Columbia, and outlying areas.
(b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners.
(c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract.
(d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate."
(End of clause)
52.225-2 BUY AMERICAN CERTIFICATE (FEB 2021)
(a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product.
(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products.
(3) The terms "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies."
(b) Foreign End Products:
Line Item No Country of Origin
[List as necessary]
(c) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.
(End of provision)
52.225-13- RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (FEB 2021)
(a) Except as authorized by the Office of Foreign Assets Control (OFAC) in the Department of the Treasury, the Contractor shall not acquire, for use in the performance of this contract, any supplies or services if any proclamation, Executive order, or statute administered by OFAC, or if OFAC’s implementing regulations at 31 CFR Chapter V, would prohibit such a transaction by a person subject to the jurisdiction of the United States.
(b) Except as authorized by OFAC, most transactions involving Cuba, Iran, and Sudan are prohibited, as are most imports from Burma or North Korea, into the United States or its outlying areas. Lists of entities and individuals subject to economic sanctions are included in OFAC’s List of Specially Designated Nationals and Blocked Persons at https://home.treasury.gov/policy-issues/financial-sanctions/specially-designated-nationals-and-blocked-persons-list-sdn-human-readable-lists. More information about these restrictions, as well as updates, is available in the OFAC’s regulations at 31 CFR Chapter V and/or on OFAC’s website at https://home.treasury.gov/policy-issues/office-of-foreign-assets-control-sanctions-programs-and-information.
(c) The Contractor shall insert this clause, including this paragraph (c), in all subcontracts.
(End of clause)
52.225-20- PROHIBITION ON CONDUCTING RESTRICTED BUSINESS OPERATIONS IN SUDAN-CERTIFICATION (AUG 2009)
(a) Definitions. As used in this provision-
Business operations means engaging in commerce in any form, including by acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other apparatus of business or commerce.
Marginalized populations of Sudan means-
(1) Adversely affected groups in regions authorized to receive assistance under section 8(c) of the Darfur Peace and Accountability Act (Pub. L. 109-344) ( 50 U.S.C. 1701 note); and
(2) Marginalized areas in Northern Sudan described in section 4(9) of such Act.
Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-
(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;
(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;
(3) Consist of providing goods or services to marginalized populations of Sudan;
(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;
(5) Consist of providing goods or services that are used only to promote health or education; or
(6) Have been voluntarily suspended.
(b) Certification. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan.
(End of provision)
52.225-25-PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN ACTIVITIES OR TRANSACTIONS RELATING TO IRAN—REPRESENTATION AND CERTIFICATIONS (JUN 2020)
(a) Definitions. As used in this provision-
Person—
(1) Means–
(i) A natural person;
(ii) A corporation, business association, partnership, society, trust, financial institution, insurer, underwriter, guarantor, and any other business organization, any other nongovernmental entity, organization, or group, and any governmental entity operating as a business enterprise; and
(iii) Any successor to any entity described in paragraph (1)(ii) of this definition; and
(2) Does not include a government or governmental entity that is not operating as a business enterprise.
Sensitive technology-
(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-
(i) To restrict the free flow of unbiased information in Iran; or
(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and
(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).
(b) The offeror shall e-mail questions concerning sensitive technology to the Department of State at CISADA106@state.gov.
(c) Except as provided in paragraph (d) of this provision or if a waiver has been granted in accordance with Federal Acquisition Regulation (FAR) 25.703-4, by submission of its offer, the offeror—
(1) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran;
(2) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act. These sanctioned activities are in the areas of development of the petroleum resources of Iran, production of refined petroleum products in Iran, sale and provision of refined petroleum products to Iran, and contributing to Iran's ability to acquire or develop certain weapons or technologies; and
(3) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds the threshold at FAR 25.703-2(a)(2) with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at https://www.treasury.gov/resource-center/sanctions/SDN-List/Pages/default.aspx).
(d) Exception for trade agreements. The representation requirement of paragraph (c)(1) and the certification requirements of paragraphs (c)(2) and (c)(3) of this provision do not apply if-
(1) This solicitation includes a trade agreements notice or certification (e.g., 52.225-4, 52.225-6, 52.225-12, 52.225-24, or comparable agency provision); and
(2) The offeror has certified that all the offered products to be supplied are designated country end products or designated country construction material.
(End of provision)
In addition, the following FAR provisions are applicable to this solicitation and incorporated by reference: 52.204-7 System for Award Management (Oct 2018),
52.204-13 System for Award Management Maintenance (Oct 2018),
52.204-16 Commercial and Government Entity Code Reporting (Jul 2016),
52.204-18 Commercial and Government Entity Code Maintenance (Jul 2016).
SUMMARY STATEMENT:
Responses to this notice must include sufficient information to establish the interested parties’ bona-fide capabilities of providing the product or service. The response shall include a QUOTATION that includes: unit price, list price, total price, any shipping and handling costs, delivery days after contract award, delivery terms, prompt payment discount terms, F.O.B. Point (Destination or Origin), product or catalog number(s); product description; and any other information or factors that may be considered in the award decision. Such factors may include: past performance; special features required for effective program performance; trade-in considerations; probable life of the item selected as compared with that of a comparable item; warranty considerations; maintenance availability; and environmental and energy efficiency considerations.
Interested parties may identify in writing their interest and capability in response to this requirement. Responses to this notice shall contain sufficient information to establish the interested parties’ bona-fide capabilities for fulfilling the requirement and include: unit price, list price, shipping and handling costs, the delivery period after contract award, the prompt payment discount terms, the F.O.B. Point (Destination or Origin), the Dun & Bradstreet Number (DUNS), the Taxpayer Identification Number (TIN), and the certification of business size. All offerors must have an active registration in the System for Award Management (SAM) www.sam.gov.
All responses must be received by closing date and must reference the announcement. Responses may be submitted electronically to the attention of the contract specialist. Fax responses will not be accepted.
All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.